PA 145N ORDOURLESS Auto glass Polyurethane Adhesive

No volatile odor, no smell after application

With proper hardness, easy for secondary maintenance

Excellent adhesion and wear-resisting property

No sag or flow phenomena within 30mm perpends


Product Detail

Advantages

package

No volatile odor, no smell after application

With proper hardness, easy for secondary maintenance

Excellent adhesion and wear-resisting property

No sag or flow phenomena within 30mm perpends

Applications

Specially used for windshield and side glass of bus, car, railway vehicle (metro, high-speed rail), ship, spaceflight, engineering machinery vehicle, carriage and other vehicles; used in 4s shop for high-end cars and special vehicles.

PROPERTY PA 145N

Appearance

Black

homogeneous paste

Density (g/cm³)

1.35±0.05

Tack Free Time (min)

20-50

Curing Speed (mm/d)

3-5

Elongation at break(%)

 

400

Hardness (Shore A)

55

Tensile strength(MPa)

 

5

Shear strength( N/mm)

 

2.5

Non-volatile contents Content  (%)

95

Operation Temperature ( ℃)

5-35 ℃

Service Temperature ( ℃)

-40~+90 ℃

Shelf Life (Month)

9

 

about us
Exhibition

Storage Notice

1.Sealed and stored in cool and dry place.

2.It is suggested to be stored at 5~25 ℃, and the humidity is less than 50%RH.

3.If the temperature is higher than 40 ℃ or the humidity is more than 80%RH, the shelf life may be shorter.

Packing

310ml cartridge

400ml/600ml sausage

20pcs/box

Operation

Clean before operation

Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.

Direction of operation

Tool: Manual or pneumatic plunger caulking gun
For cartridge
1.Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle Place the cartridge in an applicator gun and squeeze the trigger with equal strength For sausage 
1.Clip the end of the sausage and place in barrel gun
2.Screw end cap and nozzle on to barrel gun
3.Using the trigger extrude the sealant with equal strength

Attention of operation

Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accident or if you feel unwell, seek medical advice immediately

Warranty and Liability

Warranty and Liability

All product properties and application details based on information are ensured to be reliable and accurate. But you still need to test its property and safety before application. All advices we supply can’t be applied in any circumstances.
CHEMPU don't make assurance of any other applications outside the specification until CHEMPU supply a special written guarantee.
CHEMPU is only responsible to replace or refund if this product is defective within the warranty period stated above.
CHEMPU makes it clear that will not take responsible for any accidents.

product display
product display
ODMOEM
Automotive adhesive application
5
feed back
certificate
about us



  • Previous:
  • Next:

  • Write your message here and send it to us